Electronic Components Datasheet Search |
|
IS-C1603H Datasheet(PDF) 10 Page - List of Unclassifed Manufacturers |
|
IS-C1603H Datasheet(HTML) 10 Page - List of Unclassifed Manufacturers |
10 / 47 page IS-C1603H Intelligent Controller Users Manual 7850 East Gelding Drive • Scottsdale, AZ 85260-3420 IS-C1603H Intelligent Controller Users Manual A.doc Page 10 of 47 Toll Free 1.877.2BUYNKK (877.228.9655) • Phone 480.991.0942 • Fax 480.998.1435 www.nkkswitches.com • Email engineering@nkkswitches.com 0410 Command to upload LED Code for a specified Module This command uploads the LED codes (ON cycle, OFF cycle) of the specified module in ASCII HEX format. command format: 2FH 52H [Module #] transmit format: (xxH) (xxH) (xxAH) [Module #] is one byte with value of 01H to 10H and must be sent in ASCII HEX format. Command to upload an attribute block for an Address This command uploads an Attribute Block from the EEPROM location to the host. command format: 2BH [Address] transmit format: (xxH) (xxAH) [Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format. Upon receiving this command the controller transmits back the [Attribute Block] which can be up to 42 bytes transmitted in ASCII HEX format. 2. Operation Commands These commands are used in real time operation. Command to download Pointer values for all the Modules This command downloads the Pointer values for active pointer. If the Pointer value is zero then the corresponding Pointer is left unchanged. The image and LED for all the modules are put to effect immediately. command format: 2DH 30H [Pointer Block] transmit format: (xxH) (xxH) (xxAH) [Pointer Block] is many bytes as the number of switches and must be sent in ASCII HEX format. Command to download one Pointer value to specified Module This command downloads the Pointer value for specified module. The module will display the image and the LED code of the new pointer immediately. command format: 2EH 30H [Module #] [Address] transmit format: (xxH) (xxH) (xxAH) (xxAH) [Module #] is one byte with value of 01H to 28H and must be sent in ASCII HEX format. [Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format. |
Similar Part No. - IS-C1603H |
|
Similar Description - IS-C1603H |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |