http://www.tracopower.com

Page 3 of 13

General Specifications

Temperature ranges

– Operating (ambient temp.)

–25°C to +70°C

– Derating above 50°C (122°F)

2 %/K

– Storage (non operating)

–25°C to +85°C

Humidity (non condensing)

95 % rel. H max.

Pollution degree

2

Temperature coefficient

0.02 %/K

Switching frequency

80 kHz typ. (pulse width modulation)

Efficiency

TIS 50 ... TIS 300: 85 % typ.

TIS 500: 90 % typ.

TIS 600: 90 % typ.

Isolation

according to IEC/EN 60950, UL 60950, UL 508

Reliability, calculated MTBF

TIS 50/75: 450’000 h / 420’000 h

(MIL-HDBK-217F, at +25°C, ground benign)

TIS 150/300: 420’000 h / 360’000 h

TIS 500/600: 340’000 h / 300’000 h

Safety standards

IEC/EN 60950-1 (SELV, except 72 VDC models)

UL/cUL 60950-1, UL 508, UL/cUL 1604

Safety approvals

– CB report

for IEC 60950

www.tracopower.com/products/tis-cb.pdf

– UL approvals

UL/cUL 60950, File e181381

UL/cUL 508, File e210002

UL/cUL 1604, File e213613 not for TIS 50 & 500

(Class I, Div. 2, Groups A, B, C and D hazardous locations)

www.ul.com -> certifications

– CSA certificate (UL 60950-1, CSA 60950-1)

www.tracopower.com/products/tis-csa.pdf

Electromagnetic compatibility (EMC), Emissions

EN 61000-6-3 / EN 61000-6-4

– Conducted RI suppression on input

EN 55011 class B, EN 55022 class B,

FCC part 15, level B

– Radiated RI suppression

EN 55011 class A, EN 55022 class A,

FCC part 15, level A

Electromagnetic compatibility (EMC), Immunity

EN 61000-6-2

– Electrostatic discharge (ESD)

IEC/EN 61000-4-2

4 kV/8 kV

– Radiated RF field immunity

IEC/EN 61000-4-3

10 V/m

– Electrical fast transient / burst immunity

IEC/EN 61000-4-4

2 kV

– Surge immunity

IEC/EN 61000-4-5

2 kV/4 kV

– Immunity to conducted RF disturbances

IEC/EN 61000-4-6

10 V

– Power frequency field immunity

IEC/EN 61000-4-8

30 A/m

Safety class

degree of electrical protection 1 (IEC 536)

Case protection

IP 20 (IEC 529)

Environment

– Vibration

IEC 60068-2-6; 1 gn, 200 sweeps, each axis

– Shock

IEC 60068-2-27; 15 gn, 11 ms, each axis

Enclosure material

aluminium (chassis) / zinc plated steel (cover)

Mounting (snap-on with self locking spring)

for 35 mm DIN-rails as per EN 50022

Connection

detachable screw terminal block

(plugs included)

(TIS 600: fixed screw terminal block)

Industrial Power Supplies

TIS Series

50–600 Watt

Instruction manual can be downloaded under:

www.tracopower.com/products/tis-manual.pdf

All specifications valid at nominal input voltage, full load and +25 °C after warm-up time unless otherwise stated.