Application Leading Tool for RX V1.01.00

Release Note

R20UT2919EJ0100 Rev1.00

Page 10 of 10

Feb. 21, 2014

5.2 Cautions Details

5.2.1 Cautions of USB

Applilet for RX is not supporting the USB.

[Workaround] There is no workaround.

5.2.2 About online Help

Applilet for RX is not supporting online help.

[Workaround] There is no workaround.

5.2.3 About the IAR Embedded Workbench

In case of IAR Embedded Workbench for Renesas RX V2.42.1, the following functions cause build

error.



Setting of High-speed On-chip Oscillator



Setting of I/O port (PortH and PortJ)

[Workaround]

Setting of High-speed On-chip Oscillator

Comment out generated line SYSTEM.HOCOWTCR.BYTE = xxxx; in a function

void R_CGC_Create(void)

Example

void R_CGC_Create(void)

{

/* Set HOCO wait time */

SYSTEM.HOCOWTCR.BYTE = _06_CGC_HOCO_WAIT_CYCLE_266;

// This line

｝

Setting of I/O port (PortH and PortJ)

There is no workaround.

Please use the

IAR Embedded Workbench for Renesas RX V2.42.2 or later.

5.2.4 Cautions of Serial Communications Interface Asynchronous Mode

Applilet is Asynchronization Mode of SCI and is not supporting the MTU clock input .

[Workaround] There is no workaround.

5.2.5 Cautions of Low Power Consumption

Applilet for RX is not supporting Low Power Consumption.

[Workaround] There is no workaround.