Electronic Components Datasheet Search |
|
FR2S1525 Datasheet(PDF) 2 Page - Clare, Inc. |
|
FR2S1525 Datasheet(HTML) 2 Page - Clare, Inc. |
2 / 5 page FR2 www.clare.com Rev. 2 Specifications All parameters are at 25 °C unless otherwise stated. Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for extended period may degrade the device and effect its reliability. Ratings (@ 25˚ C) PARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITS Contact Ratings Operate ampere turns range Full Blade Tolerance = ± 1.5NI AT 10 - 30 NI Release ampere turns range Full Blade Tolerance = ± 1.5NI AT 5 - 30 NI Switching Voltage Max DC/PeakAC Resistive V L - - 200 VDC Switching Current Max DC/PeakAC Resistive I L - - 500 mAmps Carry Current Max DC/PeakAC Resistive I C - - 1.5 Amps Contact Rating Max DC/PeakAC Resistive - - - 10 VA Life Expectancy 1V, 10mA Signal Level - - 1000 - x106 Ops 10V, 10mA Low Level - - 500 - x106 Ops 50V, 100mA Telecom Load - - 2 - x106Ops 100V, 100mA Rated Loads - - 2 - x106 Ops Static Contact Resistance 50mV, 10mA(1) CR - 80 150 m Ω Contact Material - - Ru - - Switch Specifications Insulation Resistance(2) 100V, 25 °C, 40% RH IR 109 1011 - Ω Capacitance Across Open Contacts - - 0.3 - pF Dielectric Strength(5) Between Contacts - 250 300 - VDC/Peak AC Operate Time, At nominal coil voltage, T OP - - 0.5 ms including bounce 10Hz Square Wave Release Time Zener-Diode Suppression(3) T REL - - 0.2 ms Environmental Ratings Storage Temperature T A -40 - +125 °C Operating Temperature T O -40 - +125 °C Soldering Temperature - - - +240 °C Vibration Resistance 5Hz - 200Hz G - - 20 Gs Shock Resistance 11 ±1ms, 1/ 2 Sine Wave S - - 100 Gs Weight - - 0.13 - grams/unit Parameter Min Typ Max Units Switching Voltage FR2 - DYAD® 200 Volts Switching Current FR2 - DYAD® 0.5 Amps Carry Current FR2 - DYAD® 1.5 Amps Switching Frequency FR2 - DYAD® 500 Hz Contact Resistance FR2 - DYAD® 150 m Ω (See detailed specifications for more information.) (1) Contact resistance measured with 4 terminal method, 1.1" between test leads (2) >1012 Ω is available upon request (3) A 24V zener in series with a diode across the coil (4) Use caution not to exceed vibration resistance limits while ultrasonically cleaning. Contact Clare Engineering for more details/recommendations (5) 15 ampere turn minimum Dyad® 2 |
Similar Part No. - FR2S1525 |
|
Similar Description - FR2S1525 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |