DS1812-15 datasheet(2/5 Pages) DALLAS

Part #	DS1812-15

Description	5V EconoReset with Active High Push-Pull Output

Download	5 Pages

Scroll/Zoom	100%

Manufacturer	DALLAS [Dallas Semiconductor]

Direct Link	https://www.maximintegrated.com/en.html

Logo

2 / 5 page

DS1812

2 of 5

OPERATION - POWER MONITOR

The DS1812 provides the function of detecting out-of-tolerance power supply conditions and warning a

processor-based system of impending power failure. When VCC is detected as out-of-tolerance, the RST

signal is asserted. On power-up, RST is kept active for approximately 150 ms after the power supply has

reached the selected tolerance. This allows the power supply and microprocessor to stabilize before RST

is released.

BLOCK DIAGRAM (CMOS OUTPUT) Figure 1

APPLICATION EXAMPLE Figure 2

Similar Part No. - DS1812-15

Manufacturer	Part #	Datasheet	Description
Maxim Integrated Produc...	DS1812	119Kb / 5P	5V EconoReset with Active High Push-Pull Output 041002

Manufacturer	Part #	Datasheet	Description
Maxim Integrated Produc...	DS1812	119Kb / 5P	5V EconoReset with Active High Push-Pull Output 041002
Maxim Integrated Produc...	DS1810	122Kb / 5P	5V EconoReset with Push-Pull Output 041002
Dallas Semiconductor	DS1810	54Kb / 5P	5V EconoReset with Push-Pull Output
Maxim Integrated Produc...	DS1815	121Kb / 5P	3.3V EconoReset with Push-Pull Output 041002
Dallas Semiconductor	DS1815	53Kb / 5P	3.3V EconoReset with Push-Pull Output
Alliance Semiconductor ...	ASM1812	231Kb / 9P	Low Power 5V uP Reset Active HIGH, Push-Pull Output
Alliance Semiconductor ...	ASM1810	235Kb / 9P	Low Power, 5V uP Reset Active LOW, Push-Pull Output
Maxim Integrated Produc...	DS1811	119Kb / 5P	5V EconoReset with Open Drain Output 041002
Dallas Semiconductor	DS1811	48Kb / 5P	5V EconoReset with Open Drain Output
Dallas Semiconductor	DS1817	49Kb / 5P	Active High 3.3V EconoReset