Electronic Components Datasheet Search |
|
OP268FPS Datasheet(PDF) 3 Page - OPTEK Technologies |
|
OP268FPS Datasheet(HTML) 3 Page - OPTEK Technologies |
3 / 6 page OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 01/2012 Page 3 of 6 Plastic Infrared Emitting Diode OP168F, OP169, OP268F, OP269 Series Absolute Maximum Ratings (TA=25°C unless otherwise noted) Storage and Operating Temperature Range -40o C to +100o C Reverse Voltage 2.0 V Continuous Forward Current 50 mA Peak Forward Current (1 μs pulse width, 300 pps) OP168, OP169, OP268, OP269 (A, B, C) OP268FPS 3.0 A 100 mA Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron](1) 260° C Power Dissipation(2) 100 mW Notes: 1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. A maximum of 20 grams force may be applied to the leads when soldering. 2. Derate linearly 1.33 mW/° C above 25° C. 3. For OP168 (FA, FB, FC) and OP268 (FA, FB, FC), EE(APT) is a measurement of the average apertured radiant energy incident upon a sensing area 0.081” (2.06 mm) in diameter perpendicular to and centered on the mechanical axis of the lens and 0.400” (10.16 mm) from the measurement surface. For OP169 (A, B, C) and OP269 (A, B, C), EE(APT) is a measurement of the average apertured radiant energy incident upon a sensing area 0.180” (4.57 mm) in diameter perpendicular to and centered on the mechanical axis of the lens and 0.653” (16.6 mm) from the lens tip. NOTE: EE(APT) is a measurement of the average radiant intensity within the cone formed by the above conditions. EE(APT) is not necessarily uniform within the measured area. Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode EE (APT) (3) Apertured Radiant Incidence OP168FA OP168FB OP168FC OP169A OP169B OP169C OP268FA OP268FB OP268FC OP268FPS OP269A OP269B OP269C 0.48 0.43 0.27 0.18 0.11 0.03 0.64 0.45 0.36 0.10 0.58 0.42 0.34 - - - - - - - - - - - - - - - - 0.73 - - 0.22 - - 0.99 - 0.90 - 0.82 - mW/cm2 IF = 20 mA Aperture = .081” dia. Distance = .400” from tip of lens to aperture surface VF Forward Voltage OP168, OP169 OP268, OP269 OP268FPS - - - - - - 1.40 1.50 1.80 V IF = 20 mA IR Reverse Current OP168, OP169, OP268, OP269 OP268FPS - - - - 100 20 µA VR= 2.0 V λP Wavelength at Peak Emission OP168, OP169 OP268, OP269 OP268FPS - - - 935 890 850 - - - nm IF = 20 mA |
Similar Part No. - OP268FPS |
|
Similar Description - OP268FPS |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |