Electronic Components Datasheet Search |
|
SP4307 Datasheet(PDF) 1 Page - SIPAT Co,Ltd |
|
SP4307 Datasheet(HTML) 1 Page - SIPAT Co,Ltd |
1 / 10 page Page 1 of 10 The SP4307 is a high linearity, 5-bit RF Digital Step Attenuator (DSA) covering a 15.5 dB attenuation range in 0.5 dB steps. The device is pin compatible with the SP430x series. This 75- ohm RF DSA provides both parallel (latched or direct mode) and serial CMOS control interface, operates on a single 3-volt supply and maintains high attenuation accuracy over frequency and temperature. It also has a unique control interface that allows the user to select an initial attenuation state at power- up. The SP4307 exhibits very low insertion loss and low power consumption. This functionality is delivered in a 4x4 mm QFN footprint. The SP4307 is manufactured on SIPAT’s CMOS process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Product Specification 75 Ω RF Digital Attenuator 5-bit, 15.5 dB, DC – 2.0 GHz Product Description Figure 1. Functional Schematic Diagram SP4307 Features • Attenuation: 0.5 dB steps to 15.5 dB • Flexible parallel and serial programming interfaces • Latched or direct mode • Unique power-up state selection • Positive CMOS control logic • High attenuation accuracy and linearity over temperature and frequency • Very low power consumption • Single-supply operation • 75 Ω impedance • Pin compatible with SP430x series • Packaged in a 20 Lead 4x4 mm QFN Table 1. Electrical Specifications @ +25°C, VDD = 3.0 V Notes: 1. Device Linearity will begin to degrade below 1MHz 2. Max input rating in Table 3 & Figures on Pages 4 to 6 for data across frequency. 3. Note Absolute Maximum in Table 3. 4. Measured in a 50 Ω system. Control Logic Interface Parallel Control Power-Up Control Serial Control RF Input RF Output Switched Attenuator Array 5 3 1 Parameter Test Conditions Frequency Minimum Typical Maximum Units Operation Frequency DC 2000 MHz Insertion Loss1 DC ≤ 1.2 GHz - 1.4 1.95 dB Attenuation Accuracy Any Bit or Bit Combination DC ≤ 1.2 GHz - - ±(0.15 + 4% of atten setting) Not to exceed +0.25dB dB dB 1 dB Compression3,4 1 MHz ≤ 1.2 GHz 30 34 - dBm Input IP31,2,4 Two-tone inputs up to +18 dBm 1 MHz ≤ 1.2 GHz - 52 - dBm Return Loss Zo = 75 ohms DC ≤ 1.2 GHz 10 13 - dB Switching Speed 50% control to 0.5 dB of final value - - 1 µs Figure 2. Package Type 20 Lead 4x4 mm QFN Tel: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com |
Similar Part No. - SP4307 |
|
Similar Description - SP4307 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |