Electronic Components Datasheet Search |
|
ADS574JU Datasheet(PDF) 3 Page - Texas Instruments |
|
ADS574JU Datasheet(HTML) 3 Page - Texas Instruments |
3 / 17 page 3 ® ADS574 INTERNAL REFERENCE VOLTAGE Voltage +2.4 +2.5 +2.6 TTT V Source Current Available for External Loads 0.5 T mA POWER SUPPLY REQUIREMENTS Voltage: VEE (7) –16.5 VDD TT V VDD +4.5 +5.5 TT V Current: IEE (7) (VEE = –15V) –1 T mA IDD +13 +20 TT mA Power Dissipation (TMIN to TMAX) (VEE = 0V to +5V) 65 100 TT mW TEMPERATURE RANGE Specification 0 +70 TT °C Operating: –40 +85 TT °C Storage –65 +150 TT °C T Same specification as ADS574JE, JP, JU. NOTES: (1) With fixed 50 Ω resistor from REF OUT to REF IN. This parameter is also adjustable to zero at +25°C. (2) FS in this specification table means Full Scale Range. That is, for a ±10V input range, FS means 20V; for a 0 to +10V range, FS means 10V. (3) Maximum error at T MIN and TMAX. (4) Based on using VEE = +5V, which starts a conversion immediately upon a convert command. Using VEE = 0V to –15V makes the ADS574/ADS774 emulate standard ADC574 operation. In this mode, the internal sample/hold acquires the input signal after receiving the convert command, and does not assume that the input level has been stable before the convert command arrives. (5) Using internal reference. (6) This is worst case change in accuracy from accuracy with a +5V supply. (7) VEE is optional, and is only used to set the mode for the internal sample/hold. When VEE = –15V, IEE = –1mA typ; when VEE = 0V, IEE = ±5µA typ; when VEE = +5V, IEE = +167µA typ. SPECIFICATIONS (CONT) ELECTRICAL At TA = TMIN to TMAX , VDD = +5V, VEE = –15V to +5V, sampling frequency of 40kHz, and fIN = 10kHz, unless otherwise specified. ADS574JE, JP, JU ADS574KE, KP, KU PARAMETER MIN TYP MAX MIN TYP MAX UNITS The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems. ABSOLUTE MAXIMUM RATINGS VEE to Digital Common ....................................................... +VDD to –16.5V VDD to Digital Common .............................................................. 0V to +7V Analog Common to Digital Common .................................................... ±1V Control Inputs (CE, CS, AO, 12/8, R/C) to Digital Common .................................................. –0.5V to VDD +0.5V Analog Inputs (Ref In, Bipolar Offset, 10VIN ) to Analog Common ...................................................................... ±16.5V 20VIN to Analog Common .................................................................. ±24V Ref Out .......................................................... Indefinite Short to Common, Momentary Short to VDD Max Junction Temperature ............................................................ +165 °C Power Dissipation ........................................................................ 1000mW Lead Temperature (soldering,10s) ................................................. +300 °C Thermal Resistance, θ JA : Plastic DIPs ........................................ 100°C/W SOIC ................................................... 100 °C/W ELECTROSTATIC DISCHARGE SENSITIVITY This integrated circuit can be damaged by ESD. Burr-Brown recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degrada- tion to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE/ORDERING INFORMATION PACKAGE DRAWING TEMPERATURE LINEARITY PRODUCT PACKAGE NUMBER(1) SINAD(2) RANGE ERROR (LSB) ADS574JE 0.3" Plastic DIP 246 68 0 °C to +70°C ±1 ADS574KE 0.3" Plastic DIP 246 70 0 °C to +70°C ±1/2 ADS574JP 0.6" Plastic DIP 215 68 0 °C to +70°C ±1 ADS574KP 0.6" Plastic DIP 215 70 0 °C to +70°C ±1/2 ADS574JU SOIC 217 68 0 °C to +70°C ±1 ADS574KU SOIC 217 70 0 °C to +70°C ±1/2 NOTES: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book. (2) SINAD is Signal-to-(Noise and Distortion) expressed in dB. |
Similar Part No. - ADS574JU |
|
Similar Description - ADS574JU |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |