TLSO1044E01

FEB. 2001 IP

Printed in Japan(1000)

Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are

subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.

SPECIFICATIONS

Lamp

Input Wattage

Spectral Distribution

Type of Calibration

Calibration Unit

Stability

Window Material

(Lamp Housing)

Warm-up Time

Recommended Calibration

Fluctuation (p-p)

Drift

NOTE: AThe calibrated value is the light power at 50 cm away from front surface of lamp housing.

BThis is the recommended calibration period when high reliability is required. Please contact to our sales office for re-calibration fee.

CThis is the guaranteed time the unit satisfies requirements as calibrated light source.

DThis is an accessory coming with the unit.

Deuterium Lamp

30 W

185 nm to 400 nm

250 nm to 400 nm

Spectral Irradiance

0.05 % Max.

±0.3 %/h Max.

Synthetic Silica

10 min

100 hours or 1 year whichever

comes first

500 hours

Input Voltage

(switched manually)

Power Consumption

Cooling

Ambient Temperature

Humidity

Dimensions

(W

× H × D)

Weight

Lamp Housing

Power Supply

Lamp Housing

Power Supply

100 V ac/115 V ac/200 V ac/230 V ac

(±10 %), 50 Hz/60 Hz

90 VA

Forced Air Cooling (cooling fan is included)

Not required

0

°C to 40 °C

30 % to 85 % (without condensation)

100 mm

× 280 mm × 100 mm

200 mm

× 107 mm × 240 mm

595 mm

× 425 mm × 345 mm

Approx. 3.5 kg

Approx. 6.7 kg

Approx. 7.8 kg

100

COOLING FAN

M37 P=1

OUTPUT

WINDOW

( 25)

50

5

100

78

39

[FRONT VIEW]

[BOTTOM VIEW]

[SIDE VIEW]

CONNECTOR *

SIDE COVER

MOUNTING

SCREW

4-M3

HEX SOCKET

HEAD BOLT

SIDE COVER

(REMOVE

THIS COVER

WHEN

REPLACING

LAMP)

M4

4-M4

PLASTIC FEET ARE ATTACHED TO

THE BOTTOM OF THE UNIT BUT

CAN BE REMOVED TO USE THEIR

HOLES FOR INSTALLATION OF THE

LAMP HOUSING.

REFERENCE SURFACE

OF CALIBRATION

* The attached cable length to connect lamp housing with power supply is 2000 mm

[FRONT VIEW]

[SIDE VIEW]

[REAR VIEW]

DEUTERIUM LAMP POWER SUPPLY

MODEL L7820

POWER

ON

OFF

OUTPUT

FILAMENT

ANODE

0.5A

10V

FILAMENT

2A

FILAMENT

5A

POWER

POWER

2A (100V, 118V)

AC 100V

200 ± 2

240 ± 2

CONNECTOR *

AC INPUT

CONNECTOR

HAMAMATSU PHOTONICS K.K., Electron Tube Center

314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205

U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com

Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de

France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr

United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk

North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se

Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it

HOMEPAGE URL http://www.hamamatsu.com

Lamp Housing

Power Supply

TLSOA0072EA

TLSOA0073EA

LAMP HOUSING

POWER SUPPLY