1

TM

File Number

4855

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 321-724-7143

K7™ is a trademark of Advanced Micro Devices, Inc.

HIP6004D

Buck and Synchronous-Rectifier (PWM)

Controller and Output Voltage Monitor

The HIP6004D provides complete control and protection for

a DC-DC converter optimized for high-performance

microprocessor applications. It is designed to drive two

N-Channel MOSFETs in a synchronous-rectified buck

topology. The HIP6004D integrates all of the control, output

adjustment, monitoring and protection functions into a single

package.

The output voltage of the converter is easily adjusted and

precisely regulated. The HIP6004D includes a fully TTL-

compatible 5-input digital-to-analog converter (DAC) that

increments steps. The precision reference and voltage-mode

regulator hold the selected output voltage to within

±1% over

temperature and line voltage variations.

The HIP6004D provides simple, single feedback loop,

voltage-mode control with fast transient response. It includes

a 200kHz free-running triangle-wave oscillator that is

adjustable from below 50kHz to over 1MHz. The error

amplifier features a 15MHz gain-bandwidth product and

6V/

µs slew rate which enables high converter bandwidth for

fast transient performance. The resulting PWM duty ratio

ranges from 0% to 100%.

The HIP6004D monitors the output voltage with a window

comparator that tracks the DAC output and issues a Power

Good signal when the output is within

±10%. The HIP6004D

protects against over-current and overvoltage conditions by

inhibiting PWM operation. Additional built-in overvoltage

protection triggers an external SCR to crowbar the input

supply. The HIP6004D monitors the current by using the

a current sensing resistor.

Features

• Drives Two N-Channel MOSFETs

• Operates from +5V or +12V Input

• Simple Single-Loop Control Design

- Voltage-Mode PWM Control

• Fast Transient Response

- High-Bandwidth Error Amplifier

- Full 0% to 100% Duty Ratio

• Excellent Output Voltage Regulation

-

±1% Over Line Voltage and Temperature

• TTL-Compatible 5-Bit Digital-to-Analog Output

Voltage Selection

• Power-Good Output Voltage Monitor

• Over-Voltage and Over-Current Fault Monitors

- Does Not Require Extra Current Sensing Element,

• Small Converter Size

- Constant Frequency Operation

- 200kHz Free-Running Oscillator Programmable from

50kHz to over 1MHz

Applications

• Power Supply for K7™, and Other Microprocessors

• High-Power DC-DC Regulators

• Low-Voltage Distributed Power Supplies

Pinout

HIP6004D

(SOIC)

TOP VIEW

Ordering Information

PART NUMBER

TEMP.

PACKAGE

PKG.

NO.

HIP6004DCB

0 to 70

20 Ld SOIC

M20.3

NOTE: When ordering, use the entire part number. Add the suffix T

to obtain the part in tape and reel, e.g., HIP6004DCB-T.

11

12

13

14

15

16

17

18

20

19

10

9

8

7

6

5

4

3

2

1

VSEN

OCSET

SS

VID0

VID1

VID2

VID4

VID3

COMP

FB

RT

VCC

LGATE

PGND

OVP

BOOT

UGATE

PHASE

PGOOD

GND

Data Sheet

April 2000