Information furnished by Analog Devices is believed to be accurate and

reliable. However, no responsibility is assumed by Analog Devices for its

use, nor for any infringements of patents or other rights of third parties

which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Analog Devices.

a

ADG752

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781/329-4700

World Wide Web Site: http://www.analog.com

Fax:

© Analog Devices, Inc.,

FUNCTIONAL BLOCK DIAGRAM

CMOS, Low Voltage

RF/Video, SPDT Switch

IN

D

S2

S1

ADG752

SWITCH SHOWN FOR A LOGIC "1" INPUT

FEATURES

High Off Isolation –80 dB at 30 MHz

–3 dB Signal Bandwidth 250 MHz

+1.8 V to +5.5 V Single Supply

Low On-Resistance (15

Typically)

Low On-Resistance Flatness

Fast Switching Times

Typical Power Consumption < 0.01

W

TTL/CMOS Compatible

APPLICATIONS

Audio and Video Switching

RF Switching

Networking Applications

Battery Powered Systems

Communication Systems

Relay Replacement

Sample-and-Hold Systems

GENERAL DESCRIPTION

The ADG752 is a low voltage SPDT (single pole, double throw)

switch. It is constructed using switches in a T-switch configura-

tion, which results in excellent Off Isolation while maintaining

good frequency response in the ON condition.

High off isolation and wide signal bandwidth make this part

suitable for switching RF and video signals. Low power con-

sumption and operating supply range of +1.8 V to +5.5 V make

it ideal for battery powered, portable instruments.

The ADG752 is designed on a submicron process that provides

low power dissipation yet gives high switching speed and low on

resistance. This part is a fully bidirectional switch and can handle

signals up to and including the supply rails. Break-before-make

switching action ensures the input signals are protected against

momentary shorting when switching between channels.

The ADG752 is available in 6-lead SOT-23 and 8-lead

µSOIC

packages.

PRODUCT HIGHLIGHTS

1. High Off Isolation –80 dB at 30 MHz.

2. –3 dB Signal Bandwidth 250 MHz.

3. Low On Resistance (15

Ω).

4. Low Power Consumption, typically <0.01

µW.

5. Break-Before-Make Switching Action.

6. Tiny 6-lead SOT-23 and 8-lead

µSOIC packages.

2013

781/461-3113

REV. A