Multichannel detector head controller

C7557-01

3

Operation method

· Measurements by external sync

· Controlling an external shutter or external light source

· Measuring the video signal

1. Make connections as indicated in  to .



LINE

Connect to the power cable.



USB

Connect to a computer through the USB cable.



TE CONTROL I/O

Connect to the “TE CONTROL I/O” terminal on the detector head.



SIGNAL I/O

Connect to the “I/O SIGNAL” terminal on the detector head.



GND

When a 2-pin AC plug is used with the power cable, use this GND connector to ground the unit.

2. When all the connections are complete, turn on the power to the C7557-01.

3. Install the MCD USB driver and softeware. (For details on the MCD USB driver and software, refer to the operation manual supplied in

the package.)

Prepare a BNC cable in the following cases:

Front view

Rear view

LINE

RS-232C

USB ID

USB

SYNC.OUT

VIDEO OUT

PULSE OUT

TRIG.IN

TE CONTROL I/O

SIGNAL I/O

POWER

KACCC0403EA

Parameter

Specification

Compatible OS

Windows 7 (32-bit, 64-bit)/

Windows 8 (64-bit)/

Windows 8.1 (64-bit)

Software