Electronic Components Datasheet Search |
|
AP4201 Datasheet(PDF) 8 Page - Asahi Kasei Microsystems |
|
AP4201 Datasheet(HTML) 8 Page - Asahi Kasei Microsystems |
8 / 27 page [AP4201] 015008157-E-00 - 8 - 2015/09 38 LEDG2 Same as 17-pin G2 pin (connect to LED cathode).Current source/open drain output. Control the internal MONFET to drive LED with lighting setting 39 LEDB2 Same as 17-pin B2 pin (connect to LED cathode).Current source/open drain output. Control the internal MONFET to drive LED with lighting setting. 40 LEDR1 Same as 17-pin B2 pin (connect to LED cathode).Current source/open 41 LEDG1 Same as 17-pin G1 pin (connect to LED cathode).Current source/open drain output. Control the internal MONFET to drive LED with lighting setting. 42 LEDB1 Same as 17-pin B1 pin (connect to LED cathode).Current source/open drain output. Control the internal MONFET to drive LED with lighting setting. 43 LEDR0 Same as 17-pin R0 pin (connect to LED cathode).Current source/open drain output. Control the internal MONFET to drive LED with lighting setting. 44 LEDG0 Same as 17-pin G0 pin (connect to LED cathode).Current source/open drain output. Control the internal MONFET to drive LED with lighting setting. 45 LEDB0 Same as 17-pin B0 pin (connect to LED cathode).Current source/open drain output. Control the internal MONFET to drive LED with lighting setting. 46 A0 VDC1 VDC1 IC address input pin 0 (Built in 100kΩ pull-up resistor) Configure by connecting to GND or OPEN. 47 A1 VDC1 VDC1 IC address input pin 1 (Built in 100kΩ pull-up resistor) Configure by connecting to GND or OPEN. 48 A2 VDC1 VDC1 IC address input pin 2 (Built in 100kΩ pull-up resistor) Configure by connecting to GND or OPEN. Note 1. Handling of unused pins. (complementary): Set all unused pins open when the either interface for LED gradation data is selected. There is no need to connect unused pin to GND. Since No. 3~5 pins are always used, the circuit for unused status is not built-in to these pins. It is necessary to control these pins to not become Hi-Z state while the power is supplied. Note 2. The PGND pin and the GND pin are not connected internally. Therefore these pins must be connected externally. Note 3. symbol means high voltage tolerance MOS, the pin with this MOS can tolerate high voltage. |
Similar Part No. - AP4201 |
|
Similar Description - AP4201 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |