SN74LVC2G08

SCES198N – APRIL 1999 – REVISED DECEMBER 2015

www.ti.com

9 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component

specification, and TI does not warrant its accuracy or completeness. TI’s customers are

responsible for determining suitability of components for their purposes. Customers should

validate and test their design implementation to confirm system functionality.

9.1 Application Information

The SN74LVC2G08 is a high-drive CMOS device that can be used for implementing AND logic with a high

output drive, such as an LED application. It can produce 24 mA of drive current at 3.3 V, making it Ideal for

driving multiple outputs and good for high-speed applications up to 100 MHz. The inputs are 5.5-V tolerant

9.2 Typical Application

Figure 4. Typical Application

9.2.1 Design Requirements

This device uses CMOS technology and has balanced output drive. Tak care to avoid bus contention because it

can drive currents that would exceed maximum limits. The high drive will also create fast edges into light loads

so routing and load conditions must be considered to prevent ringing.

9.2.2 Detailed Design Procedure

1. Recommended Input Conditions

–

Rise time and fall time specs. See (

Δt/ΔV) in the Recommended Operating Conditions table.

–

–

2. Recommended Output Conditions

–

Conditions table.

–

10

Submit Documentation Feedback

Copyright © 1999–2015, Texas Instruments Incorporated

Product Folder Links: SN74LVC2G08