A213

0.8mm Pitch Stacking Height 5 to 9mm Connector

FX6 Series

sFeatures

1. Stacking Height 5 to 9mm

The board to board stacking height can be set at every

millimeter between 5 and 9mm.

2. Effective Contact Length 1.7mm

Despite the low profile type connector, the connector has the

1.7mm long effective contact length and provides a margin

sufficient to contact.

3. Mating Guide

The self-alignment for mating action exhibits a high guide

level at ± 1mm, and makes the mating process easier by

providing the guide rib.

4. Automatic Mounting

The standard packaging specification specifies the stick

package, considering the automatic mount, while the emboss

package can also correspond to the connector with less than

80 contacts. (However, the product is limited to 80 contacts.)

5. SMT Coplanarity

The lead coplanarity on the SMT soldered area is maintained

with the high accuracy of less than 0.1mm.

sProduct Specifications

Rating

Current rating 0.5A

Operating Temperature Range -55ç to +85ç Note 1.

Storage Temperature Range -10ç to +60ç Note 2.

Voltage rating 100V AC

Operating Humidity Range 40% to 80%

Storage Humidity Range 40% to 70%

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

sApplications

Note PC, business equipments such as handy terminals, and other equipment which require miniaturization or light-weight.

Item

Specification

Condition

1. Insulation Resistance

100M ohms min

250V DC

2. Withstanding voltage

No flashover or insulation breakdown.

300V AC/1 minute

3. Contact Resistance

40m ohms max.

100mA

4. Vibration

No electrical discontinuity of 1µs or more

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

5.

Insulation resistance: 100m ohms min.

96 hours at temperature of 40ç and humidity of 90% to 95%

6. Temperature Cycle

Contact resistance: 50m ohms max:

Insulation resistance: 100m ohms min.

7. Durability (Mating/un-mating) Contact resistance: 50m ohms max.

100 cycles

8. Resistance to Soldering

No deformation of components affecting performance. Reflow: At the recommended temperature profile

heat

Manual soldering: 300ç for 3 seconds

5~9mm

Stacking Height: 5 to 9mm

Mounting area 50% OFF, compared with the half pitch connector

Half pitch connector

(FX2 series)

FX6 series

(If compared with 60 contacts)

(-55ç: 30 minutes 15 to 35ç: 2 to 3 minutes