AA-2063-7.5

USA

JMK Inc 15 Caldwell Dr. Amherst, NH 03031

PH: 603 886-4100

FX: 603 886-4115

email: info@jmkfilters.com

EUR

JMK Inc

Glasgow, Scotland UK

PH: 44 (0) 7785-310729

FX: 44 (0) 1415-891884

Operating Voltage = ___________________85 to 250 V~

Operating Current = ______________________ 7.5 Amp

Operating Frequency = __________________ 50/400 Hz

Operating Temperature, High = ______ See Temp.Curve

Operating Temperature, Low = ___________ -20º C, Std

= ____________-40º C, HT

Storage Temperature = ______________-40º C—100º C

Diel. Withstanding (L - Case) = _____________1500 Vac

Diel. Withstanding (L - L) = ________________1500 Vdc

Leakage Current = ____________ 1.2 ma @ 220V, 60Hz

Max. Residual Volt. after 1 sec = ____________ 34 Volts

Weight = _________________________________ 0.8 lb

Calculated MTBF= ________22,214,817 hrs. @ 30°C GB

Failure Rate = __________________________ 0.045015

The AA-2063-7.5 filter has been designed to operate with

the VICOR PFC MICRO. This filter was

specifically

designed to allow the MIL COTS PFC MICRO to meet

the conducted emission requirements of Mil-Std-461D, E

or F.

The standard filter has a chassis mount enclosure but

the filter enclosure can be modified to add a connector

input or other terminals to suit your requirements.

The leads are Teflon but can be changed if the Teflon is

an issue.

The filter is lead free and RoHS.

Ordering Information

Standard Unit: AA-2063-7.5

Expanded Temperature Range: AA-2063-7.5HT

INSERTION LOSS vs. FREQUENCY