ADC10D020

www.ti.com

SNAS143D – SEPTEMBER 2001 – REVISED MARCH 2013

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2) (3)

Positive Supply Voltages

3.8V

Voltage on Any Pin

±25 mA

±50 mA

Human Body Model

2500V

Machine Model

250V

Soldering Temperature,

235°C

Storage Temperature

−65°C to +150°C

(1)

All voltages are measured with respect to GND = AGND = DGND = 0V, unless otherwise specified.

(2)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the

Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may

degrade when the device is not operated under the listed test conditions.

(3)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and

specifications.

(4)

25 mA. The 50 mA maximum package input current rating limits the number of pins that can safely exceed the power supplies with an

input current of 25 mA to two.

(5)

operating ambient temperature of 85°C. Note that the power dissipation of this device under normal operation will typically be about 170

mW (150 mW quiescent power + 20 mW due to 1 LVTTL load on each digital output). The values for maximum power dissipation listed

above will be reached only when the ADC10D020 is operated in a severe fault condition (e.g. when input or output pins are driven

beyond the power supply voltages, or the power supply polarity is reversed). Obviously, such conditions should always be avoided.

(6)

Human body model is 100 pF capacitor discharged through a 1.5 k

Ω resistor. Machine model is 220 pF discharged through 0Ω.

(7)

See AN450, “Surface Mounting Methods and Their Effect on Product Reliability”, or the section entitled “Surface Mount” found in any

post 1986 Texas Instruments Linear Data Book, for other methods of soldering surface mount devices.

Operating Ratings

(1) (2)

Operating Temperature Range

+2.7V to +3.6V

GAIN = Low

GAIN = High

GAIN = Low

GAIN = High

0.8V to 1.5V

Digital Input Pins Voltage Range

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the

Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may

degrade when the device is not operated under the listed test conditions.

(2)

All voltages are measured with respect to GND = AGND = DGND = 0V, unless otherwise specified.

Copyright © 2001–2013, Texas Instruments Incorporated

Submit Documentation Feedback

5

Product Folder Links: ADC10D020