4

LM2679

SNVS026O – MARCH 2000 – REVISED JUNE 2016

www.ti.com

Product Folder Links: LM2679

Submit Documentation Feedback

Copyright © 2000–2016, Texas Instruments Incorporated

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended

Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and

specifications.

(3)

The absolute maximum specification of the switch voltage to ground applies to DC voltage. An extended negative voltage limit of –10 V

applies to a pulse of up to 20 ns, –6 V of 60 ns and –3 V of up to 100 ns.

6 Specification

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1) (2)

MIN

MAX

UNIT

Input supply voltage

45

V

Soft-start pin voltage

–0.1

6

V

–1

V

Boost pin voltage

V

Feedback pin voltage

–0.3

14

V

Power dissipation

Internally limited

Soldering temperature

Wave (4 s)

260

°C

Infrared (10 s)

240

Vapor phase (75 s)

219

–65

150

°C

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

ESD was applied using the human-body model, a 100-pF capacitor discharged through a 1.5-kΩ resistor into each pin.

6.2 ESD Ratings

VALUE

UNIT

Electrostatic discharge

±2000

V

6.3 Recommended Operating Conditions

MIN

MAX

UNIT

Supply voltage

8

40

V

–40

125

°C