LMP2012QML

SNOSAU5H – MARCH 2007 – REVISED APRIL 2013

www.ti.com

LMP2012 Electrical Characteristics 2.7V AC Parameters

The following conditions apply, unless otherwise specified.

V

Sub-

Symbol

Parameter

Conditions

Notes

Min

Max

Units

groups

GBW

Gain-Bandwidth Product

3

1

5

MHz

4

SR

Slew Rate

4

V/

μs

Phase Margin

60

Deg

Gain Margin

−14

dB

Input-Referred Voltage Noise

35

nV/

√Hz

Input-Referred Voltage Noise

850

Input Overload Recovery Time

50

ms

(1)

Typical values represent the most likely parametric norm.

LMP2012 Electrical Characteristics 2.7V DC Parameters – 50 krad(Si) Post Radiation Limits @

+25°C

(1)

The following conditions apply, unless otherwise specified.

V

Sub-

Symbol

Parameter

Conditions

Notes

Typ

Min

Max

Units

groups

Supply Current per Channel

1.75

mA

1

(1)

Pre and post irradiation limits are identical to those listed under DC Parameters, except those listed in the Post Radiation Limit tables.

This is worst case drift, deltas are performed at room temperature post operation life. All other parameters, no deltas required.

Symbol

Parameter

Conditions

Limit

Units

Input offset voltage

2.7 V

±2

μV

4

Submit Documentation Feedback

Copyright © 2007–2013, Texas Instruments Incorporated

Product Folder Links: LMP2012QML