Electronic Components Datasheet Search |
|
BM62 Datasheet(PDF) 9 Page - Microchip Technology |
|
BM62 Datasheet(HTML) 9 Page - Microchip Technology |
9 / 70 page 2016 Microchip Technology Inc. DS60001403A - Page 9 BM62/64 Table 1-2 provides the pin description of the BM62 module. TABLE 1-2: BM62 PIN DESCRIPTION Pin No Pin Type Pin Name Description 1 I/O P0_0 Configurable control or indication pin (internally pulled-up if configured as an input) • Slide switch detector •UART TX_IND 2 I EAN External address-bus negative System configuration pin along with the P2_0 and P2_4 pins, used to set the module in any one of the fol- lowing three modes: • Application mode (for normal operation) • Test mode (to change EEPROM values) • Write Flash mode (to enter a new firmware into the module), refer to Table 5-1 ROM: Must be pulled high to VDD_IO Flash: Must be pulled down with 4.7 kOhm to GND 3 I/O P3_0 Configurable control or indication pin (Internally pulled-up, if configured as an input) AUX-In detector 4 I/O P2_0 System configuration pin along with P2_4 and EAN pins, used to set the module in any one of the following three modes: • Application mode (for normal operation) • Test mode (to change EEPROM values), • Write Flash mode (to enter a new firmware into the module), refer toTable 5-1 5 I/O P1_5 Configurable control or indication pin (Internally pulled-up, if configured as an input) • NFC detection pin • Out_Ind_1 • Slide switch detector 6 I/O P0_4 Configurable control or indication pin (Internally pulled-up, if configured as an input) • NFC detection pin • Out_Ind_1 7 O SPKR Analog headphone output, right channel 8 O AOHPM Headphone common mode output/sense input 9 O SPKL Analog headphone output, left channel 10 P VDDA Analog reference voltage. Do not connect, for internal use only 11 I MIC1_P MIC1 mono differential analog positive input 12 I MIC1_N MIC1 mono differential analog negative input 13 P MIC1_BIAS Electric microphone biasing voltage 14 I AIR Right-channel, single-ended analog input 15 I AIL Left-channel, single-ended analog input 16 I RST_N System Reset (active-low) 17 - NC No connection |
Similar Part No. - BM62 |
|
Similar Description - BM62 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |