Electronic Components Datasheet Search |
|
CL325 Datasheet(PDF) 7 Page - Supertex, Inc |
|
CL325 Datasheet(HTML) 7 Page - Supertex, Inc |
7 / 7 page Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. website: http//www.supertex.com. ©2008 All rights reserved. Unauthorized use or reproduction is prohibited. 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 7 CL325 (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Doc.# DSFP-CL325 A091508 8-Lead SOIC (Narrow Body w/Heat Slug) Package Outline (SG) 4.90x3.90mm body, 1.70mm height (max), 1.27mm pitch Symbol A A1 A2 b D D1 E E1 E2 e h L L1 L2 θ θ1 Dimension (mm) MIN 1.25* 0.00 1.25 0.31 4.80* 3.30† 5.80* 3.80* 2.29† 1.27 BSC 0.25 0.40 1.04 REF 0.25 BSC 0O 5O NOM - - - - 4.90 - 6.00 3.90 - - - - - MAX 1.70 0.15 1.55* 0.51 5.00* 3.81† 6.20* 4.00* 2.79† 0.50 1.27 8O 15O JEDEC Registration MS-012, Variation BA, Issue E, Sept. 2005. * This dimension is not specified in the original JEDEC drawing. The value listed is for reference only. † This dimension is a non-JEDEC dimension. Drawings not to scale. Supertex Doc. #: DSPD-8SOSG, Version C090408. D Seating Plane Gauge Plane L L1 L2 Top View Side View View A - A View B View B θ1 θ E1 E A A2 A1 A A Seating Plane e b h h 8 1 D1 E2 Bottom View Exposed Thermal Pad Zone Note 1 Note 1 (Index Area D/2 x E1/2) 8 1 Notes: A Pin 1 identifier must be located in the index area indicated. The Pin 1 identifier can be: a molded mark/identifier; an embedded metal marker; or a printed indicator. 1. |
Similar Part No. - CL325_08 |
|
Similar Description - CL325_08 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |