Electronic Components Datasheet Search |
|
TPA0142PWPR Datasheet(PDF) 1 Page - Texas Instruments |
|
TPA0142PWPR Datasheet(HTML) 1 Page - Texas Instruments |
1 / 32 page www.ti.com FEATURES 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 GND PCB ENABLE VOLUME LOUT+ LLINEIN LHPIN PVDD RIN LOUT– LIN BYPASS GND GND RLINEIN SHUTDOWN ROUT+ RHPIN VDD PVDD CLK ROUT– SE/BTL PC-BEEP GND PWP PACKAGE (TOP VIEW) TPA0142 SLOS248E – JUNE 1999 – REVISED SEPTEMBER 2004 2.8-W STEREO AUDIO POWER AMPLIFIER WITH DC VOLUME CONTROL • Compatible With PC 99 Desktop Line-Out Into 10-k Ω Load • Compatible With PC 99 Portable Into 8- Ω Load • Internal Gain Control, Which Eliminates External Gain-Setting Resistors • DC Volume Control From 20 dB to -40 dB • 2.8-W/Ch Output Power Into a 3- Ω Load • PC-Beep Input • Depop Circuitry • Stereo Input MUX • Fully Differential Input • Low Supply Current and Shutdown Current • Surface-Mount Power Packaging 24-Pin TSSOP PowerPAD™ DESCRIPTION The TPA0142 is a stereo audio power amplifier in a 24-pin TSSOP thermally enhanced package capable of delivering 2.8 W of continuous RMS power per channel into 3- Ω loads. This device minimizes the number of external components needed, which simplifies the design and frees up board space for other features. When driving 1 W into 8- Ω speakers, the TPA0142 has less than 0.22% THD+N across its specified frequency range. Included within this device is integrated depop circuitry that virtually eliminates transients that cause noise in the speakers. Amplifier gain is controlled by a dc voltage input on the VOLUME terminal. There are 31 discrete steps covering the range of 20 dB (maximum volume setting) to -40 dB (minimum volume setting) in 2-dB steps. When the VOLUME terminal exceeds 3.54 V, the device is muted. An internal input MUX allows two sets of stereo inputs to the amplifier. In notebook applications, where internal speakers are driven as bridge-tied load (BTL) and the line outputs (often headphone drive) are required to be single-ended (SE), the TPA0142 automatically switches into SE mode when the SE/BTL input is activated, and this effectively reduces the gain by 6 dB. The TPA0142 consumes only 20 mA of supply current during normal operation. A shutdown mode reduces the supply current to 150 µA. The PowerPAD package (PWP) delivers a level of thermal performance that was previously achievable only in TO-220-type packages. Thermal impedances of approximately 35 °C/W are truly realized in multilayer PCB applications. This allows the TPA0142 to operate at full power into 8- Ω loads at ambient temperatures of 85°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Copyright © 1999–2004, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. |
Similar Part No. - TPA0142PWPR |
|
Similar Description - TPA0142PWPR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |