www.ti.com

ABSOLUTE MAXIMUM RATINGS

DISSIPATION RATING TABLE

TPS3617

TPS3618

SLVS339D – DECEMBER 2000 – REVISED DECEMBER 2006

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be

more susceptible to damage because very small parametric changes could cause the device not to meet its published

specifications.

NOMINAL

SPECIFIED

SUPPLY

THRESHOLD

TEMPERATURE

PACKAGE

ORDERING

TRANSPORT MEDIA,

PRODUCT

VOLTAGE

RANGE

MARKING

NUMBER

QUANTITY

TPS3617-50DGK

Tube, 80

TPS3617-50

ASD

TPS3617-50DGKR

Tape and Reel, 2500

5V

4.55V

–40

°C to +125°C

TPS3618-50DGKT

Tape and Reel, 250

TPS3618-50

ANK

TPS3618-50DGKR

Tape and Reel, 2500

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet, or refer to our

web site at www.ti.com.

(2)

For other threshold votages, contact the local TI sales office for availability and lead time.

TPS3617, TPS3618

UNIT

–0.3 to 7

V

Input voltage range, PFI pin

V

WDI pin

V

400

mA

±10

mA

–40 to +85

°C

–65 to +150

°C

Lead temperature soldering 1,6 mm (1/16 inch) from case for 10 seconds

+260

°C

Continuous total power dissipation

See Dissipation Rating Table

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

DERATING FACTOR

PACKAGE

POWER RATING

POWER RATING

POWER RATING

DGK

470 mW

3.76 mW/

°C

301 mW

241 mW

2

Submit Documentation Feedback