Electronic Components Datasheet Search |
|
TPS3836 Datasheet(PDF) 2 Page - Texas Instruments |
|
|
TPS3836 Datasheet(HTML) 2 Page - Texas Instruments |
2 / 16 page TPS3836 TPS3837 TPS3838 SLVS292E – JUNE 2000 – REVISED OCTOBER 2010 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. Table 1. ORDERING INFORMATION(1) PRODUCT NOMINAL SUPPLY VOLTAGE THRESHOLD VOLTAGE (VIT) (2) TPS383xE18 1.8 V 1.71 V TPS383xJ25 2.5 V 2.25 V TPS383xH30 3.0 V 2.79 V TPS383xL30 3.0 V 2.64 V TPS383xK33 3.3 V 2.93 V (1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. (2) Custom threshold voltages are available. Minimum order quantities apply. Contact factory for details and availability. ABSOLUTE MAXIMUM RATINGS (1) Over operating free-air temperature range, unless otherwise noted. TPS383xx UNIT Supply voltage, VDD (2) 7 V All other pins(2) (3) –0.3 to 7 V Maximum low output current, IOL 5 mA Maximum high output current, IOH –5 mA Input clamp current, IIK (VI < 0 or VI > VDD) ±10 mA Output clamp current, IOK (VO < 0 or VO > VDD) ±10 mA Continuous total power dissipation See Dissipation Ratings Table Operating temperature range, TA –40 to +85 °C Storage temperature range, TSTG –65 to +150 °C Soldering temperature +260 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltage values are with respect to GND. (3) If RESET or RESET are pulled above VDD, the internal ESD structure will present an effective 1.5 kΩ resistor between these pins, causing leakage current to flow into the RESET or RESET pin. DISSIPATION RATINGS TA < +25°C DERATING FACTOR TA = +70°C TA = +85°C PACKAGE POWER RATING ABOVE TA = +25°C POWER RATING POWER RATING DBV 437 mW 3.5 mW/°C 280 mW 227 mW DRV Low-K(1) 715 mW 7.1 mW/°C 395 mW 285 mW DRV High-K(2) 1540 mW 15.4 mW/°C 845 mW 615 mW (1) The JEDEC low-K (1s) board used to derive this data was a 3in x 3in, two-layer board with 2-ounce copper traces on top of the board. (2) The JEDEC high-K (2s2p) board used to derive this data was a 3in x 3in, multilayer board with 1-ounce internal power and ground planes and 2-ounce copper traces on the top and bottom of the board. 2 Submit Documentation Feedback Copyright © 2000–2010, Texas Instruments Incorporated |
Similar Part No. - TPS3836 |
|
Similar Description - TPS3836 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |