7

Figure 10. Tape dimensions.

Figure 11. Tape leader and trailer dimensions.

Notes:

1. All dimensions in millimeters (inches).

2. Tolerance is 0.1 mm (0.004 in.) unless otherwise specified.

END

START

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MOUNTED WITH

COMPONENTS

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MINIMUM OF

230 mm

(9.05 INCH)

MAY CONSIST

OF CARRIER

AND/OR

COVER TAPE.

8.00 ± 0.30

(0.315 ± 0.012)

USER FEED

DIRECTION

DIM. A

(SEE TABLE 1)

3.50 ± 0.05

(0.138 ± 0.002)

1.75 (0.069)

DIM. C

(SEE TABLE 1)

0.20 ± 0.05

(0.008 ± 0.002)

CARRIER TAPE

COVER TAPE

DIM. B

(SEE TABLE 1)

4.00 (0.157)

2.00 ± 0.05

(0.079 ± 0.002)

4.00 (0.157)

1.50 (0.059)

HSMx-C265 SERIES 3.70 (0.146) 1.45 (0.057)

1.30 (0.051)

TABLE 1

DIMENSIONS IN MILLIMETERS (INCHES)

CATHODE

DIM. A

± 0.10 (0.004)

DIM. B

± 0.10 (0.004)

PART NUMBER

DIM. C

± 0.10 (0.004)

Convective IR Reflow Soldering

For more information on IR

reflow soldering, refer to

Application Note 1060, Surface

Mounting SMT LED Indicator

Components

.

Storage Condition:

5 to 30

°C @ 60% RH max.

Baking is required under the

condition:

a) the blue silica gel indicator

becoming white/transparent

color

b) the pack has been open for

more than 1 week

Baking recommended condition:

60

± 5°C for 20 hours.