WORLDWIDE OFFICES

Americas

2900 S.Diablo Way

Tempe, AZ 85282

USA

+1 888 412 7832

Europe (UK)

Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX

United Kingdom

+44 (0) 1384 842 211

Asia (HK)

14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon

Hong Kong

+852 2176 3333

For more information: www.artesyn.com/power

For support: productsupport.ep@artesyn.com

www.artesyn.com

LCM300 Data Sheet

Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and

service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names,

trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc.

All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal.

LCM300 DS 26Aug2016

Accessories

Miscellaneous Specifications

BURN-IN

100% Burn-in at 45 °C, at 80 - 90 % load. Duration of burn-in determined by Quality Assurance Procedures.

MTBF

The power supply has a minimum MTBF of 300K hours using the Bell core 332, issue 6 specification @ 25 °C and 40 °C, ambient, at full

load. With the power supply installed in a system in a 25 °C ambient environment and operating at full load, capacitor life shall be 5 years

at 50 °C, minimum for ALL electrolytic capacitors contained within this power supply. The power supply shall demonstrate a MTBF level of

> 500,000 hours.

QUALITY ASSURANCE

Full QAV testing shall be conducted in accordance with Artesyn Embedded Technologies Standards with reports available upon request.

WARRANTY

Artesyn Embedded Technologies shall warrant the power supply to be free of defects in materials and workmanship for a minimum period

of three years from the date of shipment, when operated within specifications. The warranty shall be fully transferable to the end owner of

the equipment powered by the supply.

Order kit part number 73-788-001 for control connector interface with .3m wires attached

Order kit part number 73-788-002 for control connector interface with unloaded housing and 20 pins

PIN 20

PIN 2

PIN 19

PIN 1

PIN 3

300 ± 5 mm

PIN 20

PIN 2

PIN 19

PIN 1

PIN 3