Technical

Specification

PQ60150SMx03

Product # PQ60150SMx03

Phone 1-888-567-9596

www.synqor.com

Doc.# 005-0005168 Rev. C

06/28/11

Page 1

Contents

Page No.

PQ60-SMA & SML Mechanical Drawing . . . . . . . . . . . . . . . . . . . . . . . . 2

PQ60-SMC Mechanical Drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

PQ60150SMx03 ELECTRICAL CHARACTERISTICS . . . . . . . . . . . . . . . . 4-5

PQ60150SMx03 Standards & Qualification Testing . . . . . . . . . . . . . . . . 6

PQ60150SMx03 Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Application Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

35-75V

100V

15V

45W

2250V dc

Sixteenth-Brick

Input

Transient Input

Output

Max Power

Isolation

DC-DC Converter

converter is a next-generation, board-mountable, isolated,

fixed switching frequency DC/DC converter that uses

synchronous rectification to achieve extremely high

conversion efficiency. The power dissipated by the converter

is so low that a heatsink is not required, which saves cost,

weight, height, and application effort. All of the power and

control components are mounted to the multi-layer PCB

substrate with high-yield surface mount technology. Since

the PowerQor converter has no explicit thermal interfaces, it

is extremely reliable. RoHS compliant (see page 15).

Operational Features

• High efficiency, xx% at full rated load current

• Delivers up to 45W of output power with minimal derating

• Operating input voltage range: 35-75Vdc, with 100V for 100ms input

transient capability

• Fixed frequency switching provides predictable EMI

• No minimum load requirement

Mechanical Features

• Industry standard sixteenth-brick pin-out configuration

• Size: 0.95" x 1.35" (24.1 x 34.3 mm)

• Height: .327" (8.3mm) low profile and .397" (10.1mm) standard

• Weight: .476oz (13.5g)

Control Features

• On/Off control referenced to input side (positive and negative logic

options are available)

• Remote sense for the output voltage compensates for output

distribution drops

• Output voltage trim permits custom voltages and voltage margining

Safety Features

Protection Features

• Output current limit and short circuit protection

• Active back bias limit

• Output over-voltage protection

• 2250V input-to-output isolation

• UL 60950-1:2003

• CAN/CSA-C22.2 No. 60950-1:2003

• EN60950-1:2001

• Needle Flame Test (IEC 695-2-2)

• IEC 61000-4-2

• RoHS compliant (see last page)

PQ60150SML03 Module