±3

±2

±1

0

1

2

3

±75

±50

±25

0

25

50

75

100

125

150

Temperature (

ƒC)

Mean

Mean - 61

Mean + 61

C005

TMP75C-Q1

A2

SDA

SCL

GND

ALERT

2

6

8

7

1

A1

A0

4

3

5

0.01 PF

Two-Wire

Host Controller

1.4 V to 3.6 V

Product

Folder

Sample &

Buy

Technical

Documents

Tools &

Software

Support &

Community

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

TMP75C-Q1

SBOS840 – NOVEMBER 2016

TMP75C-Q1 1.8-V Digital Temperature Sensor with Two-Wire Interface and Alert

1

1 Features

1

•

Qualified for Automotive Applications

•

AEC-Q100 Qualified With the Following Results:

–

Device Temperature Grade 1: –40°C to 125°C

Ambient Operating Temperature Range

–

Device HBM ESD Classification Level 2

–

Device CDM ESD Classification Level C5

•

Low-Voltage Alternative to NCT75 and ADT75

•

Digital Output with Two-Wire Serial Interface

•

Up to 8 Pin-Programmable Bus Addresses

•

Overtemperature ALERT Pin with Programmable

Trip Values

•

Shutdown Mode for Battery Power Saving

•

One-Shot Conversion Mode

•

Operating Temperature Range: –40°C to +125°C

•

Operating Supply Range: 1.4 V to 3.6 V

•

Quiescent Current:

15 μA Active (typ), 0.3 μA Shutdown (typ)

•

Accuracy:

–

±0.25°C (typ) from 0°C to +70°C

–

±0.5°C (typ) from –20°C to +85°C

–

±1°C (typ) from –40°C to +125°C

•

Resolution: 12 Bits (0.0625°C)

•

Packages: SOIC-8 and VSSOP-8

2 Applications

•

Server and Computer Thermal Management

•

Telecommunication Equipment

•

Office Machines, Set-Top Boxes,

Thermostat Controls

•

Video Game Consoles

•

Power Supply and Battery Thermal Protection

•

Environmental Monitoring and HVAC

•

Electrical Motor Driver Thermal Protection

3 Description

The TMP75C-Q1 is an integrated digital temperature

sensor with a 12-bit analog-to-digital converter (ADC)

that can operate at a 1.8-V supply, and is pin and

register compatible with the NCT75 and ADT75. This

device

is

available

in

SOIC-8

and

VSSOP-8

packages and requires no external components to

sense the temperature. The TMP75C-Q1 is capable

of reading temperatures with a resolution of 0.0625°C

and is specified over a temperature range of –40°C to

+125°C.

The TMP75C-Q1 features SMBus and two-wire

interface compatibility, and allows up to eight devices

on the same bus with the SMBus overtemperature

alert function. The programmable temperature limits

and the ALERT pin allow the sensor to operate as a

stand-alone thermostat, or an overtemperature alarm

for power throttling or system shutdown.

The factory-calibrated temperature accuracy and the

noise-immune digital interface make the TMP75C-Q1

the preferred solution for temperature compensation

of other sensors and electronic components, without

the need for additional system-level calibration or

elaborate board layout for distributed temperature

sensing.

The TMP75C-Q1 is ideal for thermal management

and protection of a variety of consumer, computer,

communication,

industrial,

and

environmental

applications.

Device Information(1)

DEVICE NAME

PACKAGE

BODY SIZE (NOM)

TMP75C-Q1

SOIC (8)

4.90 mm × 3.90 mm

VSSOP (8)

3.00 mm × 3.00 mm

(1) For all available packages, see the package option addendum

at the end of the datasheet.

Temperature Accuracy (Error) vs Ambient

Temperature

Simplified Schematic