GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

9020-0613 Rev. M page 2 of 5

www.gamewell-fci.com

Description (Continued)

The Field Configuration Program (FCP) is based on Bool-

ean logic statements providing AND, OR, NOT, and XOR

logic operators. These operators can be combined to pro-

duce additional Boolean operators such as NAND, NOR,

XNOR. The E3 Series Broadband is software-programma-

ble for multi-channel digital audio applications. It is ideal

for use with a wide range of complex system applications

including high-rise or campus installations. An array of

cabinets allows for neat, compact, installations.

A comprehensive set of timing functions can be attached

to any input/output logic statement for the staggered reset

of fan control relays, time-delayed alarm activation, auto-

matic. The E3 is a microprocessor-based fire alarm control

panel that uses an ILI-E3/ILI95-E3 Series, Intelligent Loop

Module or the ANX with two signaling line circuits and two

notification appliance circuits. When the E3 Series trans-

mits to remote locations, the optional RPT-E3 provides the

ILI-E3/ILI95-E3 Series or the ANX with signal boosting and

transient protection, as well as connectivity for both wire

and fiber-optic cables. Options also include an integral

Digital Alarm Communicator Transmitter (DACT) support-

ing most popular reporting formats.

INCC (Intelligent Network Command Center)

The Intelligent Network Command Center (INCC) serves

as the point of interface between an operator and the sys-

tem’s audio evacuation, fire fighter intercom, and building

network. The INCC occupies a single address on the E3

Series Broadband network. A typical INCC assembly con-

sists of the following:

• Intelligent Network Interface-Voice Gateway (INI-VGC-

FO or INI-VGC-UTP) module (fiber-optic or unshielded

twisted-pair).

• INI-VGC-UTP (unshielded twisted-pair only).

• One or more Addressable Switch Modules (ASM-16).

• Optional Network Graphic Annunciator (NGA).

• Remote 48 LED driver module (ANU-48).

Other component options include a paging microphone

and a fire fighter’s handset connecting to the INI-VGC-FO

or INI-VGC-UTP. Each INI-VGC can support up to 16

ASM-16 modules.

Each ASM-16 has 16 push-button switches for a maximum

capacity of 256 switches per INI-VGC command center.

Each switch has three associated LEDs, colored green,

yellow, and red. These switches and their LEDs are fully

programmable to serve any system function desired.They

can control audio speaker circuits, notification appliance

circuits, addressable relay outputs, fire fighter phone con-

trol circuits, or any other special application that might be

required.

Multiple INCCs can be configured into the E3 Series

Broadband network to serve as a completely independent

command center to operate for the local area or to operate

as remote command centers mimicking, in part or in

whole, the function of a main command center.

INX (Intelligent Network Transponder)

The Intelligent Network Transponder (INX) acts as

a network audio transponder for the E3 Series Broadband

Network. The INX transponder serves as the point of distri-

bution for the system’s audio and fire fighter telephone cir-

cuits and occupies a single node on the E3 Series

Broadband network.

A typical INX assembly consists of the following compo-

nents:

•

ILI-MB-E3/ILI95-MB-E3 • ILI-S-E3/ILI95-S-E3

• ANX

• PM-9/PM-9G power supply

• INI-VGX Module

• Up to four AM-50 Series

amplifiers

The INX transponder occupies a single address on the

network and provides termination points for the network

connection using either a pair of unshielded twisted-pair

wire or fiber-optic cable.

The INX transponder receives its power from a PM-9/PM-

9G, 9 ampere, filtered, switching power supply providing

24 VDC nominal operating voltage. The PM-9/PM-9G has

an integral standby battery charger capable of recharging

up to 55 A/H batteries. The E3BB-BB-BC/INX cabinet can

house up to 18 A/H sized batteries.

INI-VGX (Intelligent Network Interface-Voice Gateway)

The INI-VGX uses advanced Digital Signal Processing

(DSP) technology for audio compression and filtering

allowing the E3 Series Broadband to produce the clearest

audio possible while conserving network bandwidth for

instantaneous response. Background noise is automati-

cally filtered during voice paging and fire fighter communi-

cations increasing audibility and eliminating the need for

push-to-talk devices.

The INI-VGX can accommodate up to 16 different mes-

sages with a total combined duration of three minutes.

Each message can be field installed via a laptop computer

and can be in the form of a voice message or an evacua-

tion tone.

The INI-VGX also provides a fire fighter phone riser and an

addressable signaling line circuit connecting to multiple

phone jacks or warden stations through as many as 16

AOM-TELF modules. In addition, the INI-VGX SLC can

support up to 32 speaker circuits using the AOM-2SF for

single channel applications.

AM-50 Series Amplifiers

The INX or INX CAB-B cabinet can contain up to four AM-

50 Series amplifiers that produce 50 watts of power @

includes two separate speaker circuits that can be wired

Style Y (Class B) or Style Z (Class A). In addition, each

amplifier can produce its own tone or message inde-

pendently of other system amplifiers. Thus, an INX tran-

sponder

can

produce

three

audio

channels

simultaneously. Each INX transponder can support up to

four AM-50 Series amplifiers operating as main amplifiers

with one AM-50 Series amplifier used as a fail-safe backup

amplifier.