www.national.com

LIFE SUPPORT POLICY

NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL

COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or systems

which, (a) are intended for surgical implant into the body, or

(b) support or sustain life, and whose failure to perform when

properly used in accordance with instructions for use pro-

vided in the labeling, can be reasonably expected to result in

a significant injury to the user.

2. A critical component is any component of a life support

device or system whose failure to perform can be reasonably

expected to cause the failure of the life support device or

system, or to affect its safety or effectiveness.

National Semiconductor

Corporation

Americas

Tel: 1-800-272-9959

Fax: 1-800-737-7018

Email: support @ nsc.com

National Semiconductor Europe

Fax: +49 (0) 1 80-530 85 86

Email: europe.support @ nsc.com

Deutsch Tel: +49 (0) 69 9508 6208

English Tel: +44 (0) 870 24 0 2171

Francais Tel: +33 (0) 1 41 91 8790

National Semiconductor

Asia Pacific Customer

Response Group

Tel: 65-2544466

Fax: 65-2504466

Email: ap.support@nsc.com

National Semiconductor

Japan Ltd.

Tel: 81-3-5639-7560

Fax: 81-3-5639-7507

Ordering Information (Product, Samples & Design In Tools)

Item

Description

Part Number

LM9637

LM9637 VGA, 68 frames per second, monochrome CMOS image sensor.

This sensor is shipped in a 48 pin ceramic leadless chip carrier package.

Minimum order quantity, one tray of 176 units.

LM9637BCEA

Sample Kit

This kit includes 5 LM9637 samples and complete product datasheet.

LM9637SAMPLE-KIT

Headboard

This is a small PCB that houses the LM9637 sensor together with all neces-

sary discrete components. The headboard is supplied with C-MOUNT lens

block (lens not included) and documentation. M12 Lens mounts (not

included) can also be mounted on this board.

LM9637HEADBOARD

Evaluation Kit

The evaluation kit is a complete software/hardware solution designed to

give the system designer a complete raw data evaluation toolset for the

LM9637 sensor.

The kit contains a LM9637 headboard (see above), C-MOUNT lens, capture

and display board, power supply, cables, SNAPS EVAL version Windows

application software and documentation.

LM9637EVAL-KIT

1/4” Lens Kit

The 1/4” lens kit includes four 1/4” M12 lenses and an M12 mount that can

be attached to any LM9637 headboard (see above). All lenses in the kit

have been tested by National Semiconductor and are supplied with docu-

mentation and test data.

LM96-1/4-LENS-KIT