AC Electrical Characteristics

The following specifications apply for V

Boldface limits apply at the temperature extremes; all other limits T

Symbol

Parameter

Conditions

Typical

(Note 5)

LMC6022I

Units

Limit

(Note 6)

SR

Slew Rate

(Note 8)

0.11

0.05

V/µs

0.03

min

GBW

Gain-Bandwidth Product

0.35

MHz

φ

M

Phase Margin

50

Deg

G

M

Gain Margin

17

dB

Amp-to-Amp Isolation

(Note 9)

130

dB

e

n

Input-Referred Voltage Noise

F = 1 kHz

42

i

n

Input-Referred Current Noise

F = 1 kHz

0.0002

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to component may occur. Operating Ratings indicate conditions for which the device is in-

tended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The

guaranteed specifications apply only for the test conditions listed.

Note 2: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature and/or multiple Op Amp shorts

Note 4: Human body model, 100 pF discharged through a 1.5 k

Ω resistor.

Note 5: Typical values represent the most likely parametric norm.

Note 6: All limits are guaranteed by testing or correlation.

Note 10: For operating at elevated temperatures the device must be derated based on the thermal resistance

Note 11: All numbers apply for packages soldered directly into a PC board.

www.national.com

4