Zilog

Z8® CCP™ In-Circuit Emulator

CP97Z8X5301

3

1

HOST COMPUTER

Minimum Requirements

IBM PC (or 100-percent compatible) 386-Based Machine

33 MHz

4 MB RAM

VGA Video Adapter

Hard Disk Drive (3.0 MB free space)

3.5-inch, High-Density (HD) Floppy Disk Drive

RS-232C COM Port

Mouse or Pointing Device

Microsoft Windows 3.1

The following changes to the Minimum Requirements are

recommended for increased performance:

Pentium-Based Machine:

s

75 MHz (or faster)

s

16 MB of RAM (or more) SVGA Video Adapter

s

Color Monitor

s

Printer

s

Microsoft Windows 95

s

Hard Disk Drive (10.0MB free space)

ZMASM REQUIREMENTS

If using the optional Zilog Macro Cross Assembler, the following table lists the host computer requirements for it:

ADDITIONAL REQUIRED ITEMS NOT SUPPLIED

s

Power source

s

RS232 cable

s

Host computer

s

28-pin ZIF Socket

*

s

28-pin DIP Target Cable

*

s

40-pin ZIF Socket

*

s

40-pin DIP Target Cable

*

s

Your target design

Typically, this is a wire-wrapped or printed-circuit proto-

type that the Target Cable plugs into to emulate the target

device.

Table 1-1. Minimum and Recommended System Requirements

Windows 3.1

Windows 95

ZMASM

ZMASM

ZDS

Minimum Recommended Minimum

Recommended

Minimum

Recommended

Processor

386

486

486

Pentium

486

Pentium

Speed (MHz)

33

66

66

100 (or higher)

66

150 (or higher)

RAM (MB)

4

8

8

16 (or more)

8

32 (or more)

Video Adapter

VGA

SVGA

VGA

SVGA

SVGA

SVGA

Hard Disk (MB)

(Free Space)

2.0

4.0

3.0

4.0

10.0

16.0

3.5-Inch, HD Floppy Disk

Drive













RS-232C Com Port













Color Monitor









Mouse/Pt. Device













Printer









Editor





Included

Included