LIMITED WARRANTY

The Company warrants the products it manufactures against defects in materials and workmanship

for a period limited to two years from the date of shipment, provided the products have been stored,

handled, installed, and used under proper conditions. The Company’s liability under this limited

warranty shall extend only to the repair or replacement of a defective product, at The Company’s

option. The Company disclaims all liability for any affirmation, promise or representation with

respect to the products.

The customer agrees to hold Red Lion Controls harmless from, defend, and indemnify RLC against

damages, claims, and expenses arising out of subsequent sales of RLC products or products

containing components manufactured by RLC and based upon personal injuries, deaths, property

damage, lost profits, and other matters which Buyer, its employees, or sub-contractors are or may be

to any extent liable, including without limitation penalties imposed by the Consumer Product Safety

Act (P.L. 92-573) and liability imposed upon any person pursuant to the Magnuson-Moss Warranty

Act (P.L. 93-637), as now in effect or as amended hereafter.

No warranties expressed or implied are created with respect to The Company’s products except

those expressly contained herein. The Customer acknowledges the disclaimers and limitations

contained herein and relies on no other warranties or affirmations.

POWER SUPPLY REQUIREMENTS

NEW AND EXISTING INSTALLATIONS

The XCHSPA option card draws all of its power from the main board of the

Data Station Plus, Modular Controller Master or PTV. The specifications of the

Modular Controller Master, Data Station Plus or PTV account for the power

needs of an option card.

CRIMSON SOFTWARE

or it can be purchased on a CD, see “Ordering Information” for part number.

The latest version of the software is always available from the web site, and

updating your copy is free.

LED

LINK STATUS – MODEM STATUS LED

The Link Status LED is a green LED that provides information regarding the

state of the modem module’s cellular connection. The status is described below.

OFF

No power to the unit

ON

Powered and not registered on the cellular

network.

BLINKING

Powered and registered on the cellular network.

CONFIGURING A XCHSPA OPTION CARD

The XCHSPA option card is configured using Crimson (3.0 or later)

software. After choosing the appropriate Cellular modem option card, it is set

up as a PPP Modem client (choosing HSPA+ modem in the drop down box

selection), PPP Modem Server or SMS via HSPA+ Modem.

Additional information can be found in your Data Station Plus, Modular

Controller Master or PTV hardware bulletin and the Crimson User Manual.

SIM CARD INSTALLATION & DETAILS

A SIM Card with data plan enabled has to be installed on the XCHSPA option

card before installing the option card in the Data Station Plus, Modular

Controller Master or PTV. Please contact your GSM/HSPA+ cellular network

provider on setting up an account and data plan. The carrier should provide you

with a SIM card to insert into the module, along with the APN, username, and

password for data connectivity.

TROUBLESHOOTING YOUR XCHSPA OPTION

CARD

If for any reason you have trouble operating, connecting, or simply have

questions concerning your new XCHSPA option card, contact Red Lion’s

technical support. For contact information, refer to the back page of this bulletin

for phone and fax numbers.

EMAIL: techsupport@redlion.net

Web Site: http://www.redlion.net

Red Lion Controls

Headquarters

20 Willow Springs Circle

York PA 17406

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

Red Lion Controls

China

Unit 1102, XinMao Plaza

Building 9, No.99 Tianzhou Road

ShangHai, P.R. China 200223

Tel +86 21 6113 3688

Fax +86 21 6113 3683

Red Lion Controls

Europe

Softwareweg 9

NL - 3821 BN Amersfoort

Tel +31 (0) 334 723 225

Fax +31 (0) 334 893 793

Red Lion Controls

India

201-B, 2nd Floor, Park Centra

Opp 32 Mile Stone, Sector-30

Gurgaon-122002 Haryana, India

Tel +91 984 487 0503