Electronic Components Datasheet Search |
|
TMCSB1A475TRF Datasheet(PDF) 4 Page - Vishay Siliconix |
|
TMCSB1A475TRF Datasheet(HTML) 4 Page - Vishay Siliconix |
4 / 12 page TMCS www.vishay.com Vishay Polytech Revision: 26-Oct-17 4 Document Number: 40177 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note • Test conditions per JIS C5101-1 POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR A 0.078 B 0.096 C 0.100 E 0.120 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER 7" REEL A 2000 B 2000 C 500 E 500 PERFORMANCE CHARACTERISTICS ITEM CONDITION POST TEST PERFORMANCE Temperature characteristics Measure the specified characteristics in each stage Specified initial value -55 °C +85 °C +125 °C Capacitance change - -10 % to 0 % 0 % to +10 % 0 % to +12 % Dissipation factor (%) 44 5 5 66 7 7 Leakage current Not more than 0.01 CV or 0.5 μA whichever is greater - Not more than 0.1 CV or 5 μA whichever is greater Not more than 0.125 CV or 6.25 μA whichever is greater Solder heat resistance Solder dip: 260 °C ± 5 °C A, B case: 10 s ± 1 s C, E case: 5 s ± 0.5 s Reflow 260 °C, 10 s ± 1 s Capacitance change Within ± 5 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed initial specified value Moisture resistance no load Leave at 40 °C and 90 % to 95 % RH for 500 h Capacitance change Within ± 5 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed initial specified value High temperature load 85 °C. The rated voltage is applied for 2000 h Capacitance change Within ± 10 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed 125 % of initial specified value Thermal shock Leave at -55 °C, normal temperature, 125 °C, and normal temperature for 30 min, 3 min, 30 min, and 3 min. Repeat this operation 20 times running Capacitance change Within ± 5 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed initial specified value Moisture resistance load Leave at 40 °C and 90 % to 95 % RH. The rated voltage applied for 500 h Capacitance change Within ± 10 % of initial value Dissipation factor Shall not exceed 150 % of initial specified value Leakage current Shall not exceed 125 % of initial specified value Failure rate 85 °C. The rated voltage is applied through a protective resistor of 1 /V 1 % / 1000 h |
Similar Part No. - TMCSB1A475TRF |
|
Similar Description - TMCSB1A475TRF |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |